Extreme router notes
From Jaymzworld
Contents |
VLANs
- Create a phone/data vlan
create vlan "Maine-Data" create vlan "Maine-Voice"
- Remove a VLAN
delete vlan <name>
- Add a port to a VLAN
configure vlan default delete port 4:19 config vlan "Florida-Core" add port 4:19
- Assign VLAN ID/IP address tag
configure vlan "Maine-Data" tag 17 configure vlan "Maine-Data" ipaddress 10.0.20.1 255.255.255.0
- Remove the IP address
unconfigu vlan "Maine-Data" ipaddress
- Enable routing on the VLAN
enable ipforwarding vlan "Maine-Data"
- set/remove default gateway
configure iproute add default 10.0.5.105 conf iproute delete default 10.0.5.105
- If you have a port going to a switch that needs to carry multiple VLANs, ensure all VLANs are added to it tagged (ports native to the VLAN are added untagged).
configure vlan "Maine-Data" add port 3:1 tagged
Ports
- Name a port
configure port 2:1 display-string "Kansas2"
- Lock a port down
config port 1 auto off speed 100 duplex full
- view config
- show edp ports <pp> detail
- show edp ports all
- show lldp port all|<pp>|detail
- Port mirroring
- To see the current status of port mirroring:
IPTLabCore:18 # show mirroring Mirror port: 3:18(juno-eth1) is up untagged port number 5:19(Net-Net) in all vlans
- to set up a new mirror, use these steps:
IPTLabCore:2 # configure mirroring delete ports 4:16 * IPTLabCore:3 # configure mirroring add ports 3:22 * IPTLabCore:4 # show mirror Mirror port: 3:18(juno-eth1) is up untagged port number 3:22(G350) in all vlans
Configurations
- save configuration to a remote host
upload configuration 10.0.5.100 IPTLabCore-080408.cfg
- Show configuration
IPTLabCore:5 # show config # # Alpine3808 Configuration generated Sat May 29 20:55:15 2010 # Software Version 7.8.2.1 [non-ssh] [wlan] by Release_Master on 03/11/09 06:41:43 # Configuration Mode configure slot 1 module gm4x configure slot 2 module fm32t configure slot 3 module fm32t ....
- use an alternate configuration
use configuration "configname"
- Installing firmware
download image 10.0.5.100 summitX-12.0.2.25.xos vr "VR-Mgmt" primary Debug information files are present in internal-memory. These files will be removed if you continue with download. Do you want to continue with download and remove existing files from internal-memory? (y/N) Yes Do you want to install image after downloading? (y - yes, n - no, <cr> - cancel) Yes Downloading to Switch.............. Installing to Switch......
Administration
- set hostname
configure snmp sysName Switcheroo
- create/show accounts
create account user chuckles
password:
Reenter password:
show accounts
User Name Access LoginOK Failed
-------------------------------- ------ ------- ------
admin R/W 6 0
user RO 0 0
chuckles RO 1 0
- show log
IPTLabCore:8 # show log 05/29/2010 20:57:21.63 <Info:SYST> Card in slot 8 is off line 05/29/2010 20:57:21.15 <Info:SYST> Done initializing Alpine module in slot 8 702004-00-05 0103S-00213 05/29/2010 20:57:20.75 <Info:SYST> Start initializing Alpine module in slot 8 05/29/2010 20:57:17.66 <Info:SYST> Power up card 8 05/29/2010 20:57:17.63 <Info:SYST> Detected card[8] 05/29/2010 20:57:15.63 <Info:SYST> Card in slot 8 is off line 05/29/2010 20:57:15.15 <Info:SYST> Done initializing Alpine module in slot 8 702004-00-05 0103S-00213 05/29/2010 20:57:14.75 <Info:SYST> Start initializing Alpine module in slot 8
- For overall health/config stuff, use show tech
General
If you have your target host IP address, but don't know what port it's on, use the show iparp command in the core router.
IPTLabCore:5 # show iparp Destination Mac Age Static VLAN [VID] Port 10.0.1.2 00:11:85:BD:43:B3 2 NO Florida-Co[4093] 2:6(florida1) 10.0.1.3 00:11:85:BB:CF:C9 1 NO Florida-Co[4093] 2:7(florida2) 10.0.1.4 00:11:85:BB:CF:C9 10 NO Florida-Co[4093] 2:7(florida2) 10.0.1.8 00:14:5E:42:6D:D0 3 NO Florida-Co[4093] 2:3(Utah) 10.0.1.10 00:04:0D:8C:99:92 3 NO Florida-Co[4093] 2:5(florida-ipsi1A) 10.0.1.11 00:04:0D:6C:DE:0C 5 NO Florida-Co[4093] 4:13(florida-ipsi2A) 10.0.1.20 00:04:0D:A0:90:A5 3 NO Florida-Co[4093] 2:17(florida-clan1) 10.0.1.21 00:04:0D:9F:6C:BD 1 NO Florida-Co[4093] 2:18(florida-medpro1) 10.0.1.22 00:04:0D:4B:10:7F 8 NO Florida-Co[4093] 4:20(florida-clan2) 10.0.1.23 00:04:0D:8D:79:6E 0 NO Florida-Co[4093] 4:19(florida-medpro2)
- If you just want to see MACs:
PTLabCore:9 # show fdb Index Mac Vlan Age Use Flags Port List -------------------------------------------------------------------------- 02cb0-023 00:04:0D:92:4E:6F Iowa-IPTla(4076) 0000000 0000 d m 2:2(Iowa) 059a0-028 00:0D:60:F3:72:DE Florida-Co(4093) 0000000 0001 d mi 2:21 08600-05d 00:0F:1F:69:D9:D7 UtilitySer(4088) 0000000 0001 d mi 3:15(InteractCenter) 09620-041 00:04:0D:75:53:FF SIGNetwork(4092) 0000000 0000 d m 3:1(IPPhoneSwitch) 0ba80-087 00:04:0D:05:A2:1D Maine-IPTl(4082) 0000000 0001 d mi 5:4(Maine-MedPro) 0e120-141 00:04:0D:51:72:3A Texas-Voic(0020) 0000000 0001 d mi 3:1(IPPhoneSwitch) 0fe80-02f 00:04:0D:EF:29:1D Ohio-IPTLa(4085) 0000000 0001 d mi 2:8(Ohio)
